+44 (0)117 244 3000

OUR PROJECTS

Electronic Products for a broad range of sectors

Pitchmark

Pitchmark is a family run business established in 2010 with the ambition to raise the standard of line marking and to improve the quality of working life for ground staff. The founder, Mark Rodman, has over 30 years’ experience in the horticultural and amenity sector, both as an engineer and a groundsman.

Pitchmark manufactures and supplies line marking paint and machines through a distributor network, worldwide. The Pitchmark brand is becoming increasingly popular with a wide range of users, from local sports clubs to the biggest stadiums in the football clubs in the world. Pitchmark products have also been supplied and used in UEFA™ competitions such as the UEFA Super Cup 2015™ in Georgia.

Pitchmark-Logo

Since becoming established in 2010, Pitchmark products are now sold in over 20 countries across 3 continents. The feather in their cap is supplying line marking paints and machines to all 12 stadia and 32 training camps at the 2014 FIFA World Cup Brazil 2014™. Based on the success of the product, in May 2016 Pitchmark were chosen to supply their products for the UEFA European Championships 2016 in France, where four of the five ‘home nations’ showcased their talents alongside Europe’s elite.

Pitchmark - Mark Rodman

Pitchmark Founder Mark Rodman

Pitchmark Line Marker

Eco Club V2 – Spray Line Marker with Interconnection Unit fitted

Pitchmark and Cubik Innovation relationship dates back to the end of 2013 when Pitchmark were looking for a company to manufacture batches of their Interconnection units, shown above inside Eco Club v2 – Spray Line Marker. Using Cubik’s in house production department batches of 100-off Pitchmark Interconnection Units have been produced on an ongoing basis, with over 800-off units being shipped to date.

The interconnection unit sits within the heart of Pitchmarks’ Line Marking machines, the unit acts as the connection point for the various components of the system, including the; battery, pump, charger and trigger. The interconnection unit also houses the protection fuses for the system ensuring that the machines are safe to use. The units will isolate the power to the system should something unexpected happen for example over charging the battery, or the pump becoming faulty and therefore demanding to much current from the system.

Cubik work closely with Pitchmark to ensure we meet and exceed their expectations and provide support for existing and new products when needed.

Pitchmark

CONTACT US TODAY TO DISCUSS YOUR REQUIREMENTS

HiETA

Adrian Schmieder of HiETA commented: “Cubik’s quick turn-around of a functioning PCB has sped the delivery of the project and enabled me to focus on areas of the project in which HiETA has expertise.  The project is a great success and produced valuable information even from its first use.  I am very impressed with the support Cubik provided me throughout the project, from initial concept through to PCB delivery.  I will not hesitate to engage with them again as future PCB projects arise.”

Inductosense

Speaking about the collaboration between Inductosense and Cubik Innovation, Founder and CTO Dr Chenghuan Zhong (Bamboo) stated: "It was great working with the knowledgeable and experienced team at Cubik Innovation. They always provide full support as well as useful and thoughtful advice to us, helping us find solutions for really difficult problems."

Aquabar

Geoff Jones, Aquabar Inventor: "It was a pleasure to work with Cubik on our project. Paul and Sam understood the concept at one meeting, and produced a solution filling the brief within two weeks which has enabled us to find a potential partner. We will certainly use Cubik for our production units later in the year, Many thanks."

Plymouth University

Paul Davey, Associate Professor (SL) Plymouth University: "If you need a prototype developed to a high standard and on time you would be hard pushed to find someone better. They have highly trained, experienced engineers who get the job done."

Clean Energy Prospector Ltd

Damon Rand, Head Product Design: "Paul and the team have really helped us speed up the turnaround on our prototypes and assure the manufacturability of our designs. If you’re designing electronics in the South-West, then Cubik is a great choice for short-run manufacturing."

Cubik Innovation Ltd
Verona House
Filwood Road
Fishponds
Bristol BS16 3RY
United Kingdom
T: +44 (0)117 244 3000

Electronic design Bristol, Prototype, Product design, PCB design, PCB assembly, PCBA, Electronic design UK, Custom Electronics, Analogue, digital and mixed signal design - Printed circuit board design - Embedded microprocessor systems - Prototyping and test - Mechanical design - Project planning - Production support – Batch Production - Production test and ATE – Small Batch Manufacturing

© Copyright 2012-2018 Cubik Innovation Ltd.
Company No. 8150022
VAT No. 139 8630 80.